The tool for the compressor describes equipment, which is operated by compressed air and the task which can be fulfilled in such a way by means of the transformation of compressed air in kinetic energy realized.
For this exist many different tools, which are operated with compressors. These are used in many industrial, in addition, private operational areas. An example for this is the compressed air sand emitter. With this equipment it will transport possible finest sand particles by a pressure oil hose device in the free. This happens under enormously high pressure. So for example whole bodies can be gesandstrahlt easy with this machine.
This procedure is particularly used with lacquered works and associated restorations. In order to release a body, or a vehicle part from superficial rust and old lacquer to is it necessarily with many smallest quartz sand particles a kind friction to be produced.
These provide then thus for the careful abrasion of the old lacquer, or the rust. One discovered this effect for the first time in nature. Vehicles, which some time there in sandigen deserts on the way were and came into sandstorms, exhibited bright sheet metal places. Here the fine desert sand sanded the film of varnish up to the bright sheet metal down.
One made this experience now too uses themselves and tried the strength of the wind and the sand to have a feeling for. Those became possible by means of employment of the pneumatic tools. One discovered that a directed air jet with high pressure, which sand particle transported a similar Schmirgelwirkung exhibited. Thus one began to connect sand radiation devices with compressors. These supply equipment with permanent compressed air in that it the ambient air suck in, compress and to the equipment pass on. This is naturally not the only tool for the compressor, and/or, which can be operated with just this.
Numerous application possibilities for this kind of tool exist. Further equipment for this is for example compressed air tire filling, or also compressed air screw driver. These are particularly used into professional KFZ workshops, apply its in addition, within the private sector. Tire filling systems can be used for example also with bicycle tires and be replaced in such a way laborious manual pumps.